From c7b6a0f11ea9c26e5d2aacf9b8da46e96fe2d771 Mon Sep 17 00:00:00 2001 From: Steve Gilissen Date: Sat, 14 Jun 2025 03:32:50 +0200 Subject: [PATCH] Created Hardware installation (markdown) --- Hardware-installation.md | 10 ++++++++++ 1 file changed, 10 insertions(+) create mode 100644 Hardware-installation.md diff --git a/Hardware-installation.md b/Hardware-installation.md new file mode 100644 index 0000000..ab9e275 --- /dev/null +++ b/Hardware-installation.md @@ -0,0 +1,10 @@ +# Installing the board + +Inside the Meowsic keyboard, there are 2 connectors of which the pins are marked P100 to P105, and P108 to P115. +The PCB design has these 2 connectors as well. +Simply solder jumper wires from the Meowsic PCB to the corresponding pins on the purrChestrion PCB. +You can get +5V and GND from the Meowsic as well. +I recommend tapping it from the power switch. + +Make sure to measure the pins with a multimeter, so you're not switching around +5V and GND. +